Detailed Product Description

EST produce:sliocne,silicon,silicone ink,silicone rubber,silicone HTV,silicone RTV,silicone LSR,Textile printing silicone ink Etc..

DESCRIPTION
TE111 is a one-component, oxime cure, flowable type of sil- icone adhesive sealant, which cures at room temperature with moisture in the air. TE111 has a pourable consistency and excellent adhesion to metals, plastics, ceramics, glass, etc without the use of primers.

KEY FEATURES
Primerless adhesion to many substrates
Neutral cure; Little risk of corrosion (corrosion to copper and copperalloys)
Excellent high and low temperature resistance; from -35°C to 200°C
Excellent weatherability, ozone,and chemical resistance
Excellent electrical insulation properties
Simple and easy-to-use, onecomponent system

APPLICATIONS
A waterproof sealant, as well as poting, for electrical and communication equipment
Air-tight sealants for meters to keep out water and dust
Sealing and potting to equipments which require cold and heat resistance
Coating for electronic and integrated circuits and semiconductors
General adhesion for metals, glass, plastic, wood, etc

TYPICAL PROPERTY DATA      (JIS K 6249)

BOFORE CURING
Appearance -----------------------------------Flowing past
Colours ----------------------------------------- Clear
Cure Type -------------------------------------Oxime
Specific Gravity at 25°C (g/ml) --------------- 0.9796
(standards ISO R 1183,DIN  53479,NMRPS 703)
Flowability  (mm*mm/10g)---------------------------75*75
Viscosity  (cs)-------------------------------------------22555

CURING

Tack-free Time  (min) (23°C, 50%)  ----------------------- 5
Cured thickness after 48h (mm) (23°C, 50%)-------------4.86

CURED PRODUCT

Specific Gravity at 25°C  (g/ml)--------------------------------0.9796
(standards ISO2781,ASTM D297,BS 903 Part A1)
Shore A hardness--------------------------------------------------11
(Standards ISO R868,DIN 53505,ASTM D 2240,
 BS 903 Part A7,NFT 46003,NMRPS 471) 
Tensile Strength  (kg.f/c)-------------------------------------------606
(Standards ISO R37(H2),DIN 53504,ASTM D 412,
 BS903 Part A2,NFT 46002(H2),NMRPS 470)
Elongtion at break  (%)---------------------------------------------368.9
(Standards ISO R37(H2),DIN 53504,ASTM D 412,
 BS903 Part A2,NFT 46002(H2),NMRPS 470)
Dieletric strength  (KV/mm)---------------------------------------- 23
(standards NF C 26225,ASTM D 419,IEC 243)
Dieletric constant at 1 MHZ------------------------------------------3.6
(standards NF C 26230,ASTM D 150,IEC 250)
Power factor at 1 KHZ -------------------------------------------------1.98x10^-3
(standards NF C 26250,ASTM D 150,IEC 250)
Volume resistivity,Ω.cm ------------------------------------------------1x10^-15
(standards NF C 26215,ASTM D 257,IEC 93)

* Testing is performed in accordance with current EST material test methods, laboratory
* Typical property data values should not be use as specifications
SPECIFICATION
Typical product data values should not be used as specification. Assistance and specification
are available by contacting YanTai E.S.T. silicone technoogy co.,LTD
HANDLING AND SAFETY
When solvent are used, proper safety precautions must be considered toxic and must be
used only in well ventilated areas. USABLE LIFE AND STORAGE
When stored at or below 25°C (77°F) in the original unopened containers, this product has a
usable life of 12 months from the date of manufacture.

CAUTION!             

1.FOR INDUSTRIAL USE ONLY
2.This product is neither terted nor  representde as suitable for medical or  pharmaceutical uses.
3.Do not use this product for other than its intended use,or user shall bear responsibility for any problems.

HANDLING PRECAUTIONS     

1.Wear suitable protective goggles,  respirator and gloves.
2.Use only where an adequate ventilation  system is avallable to sxhaust poisonous gases.
3.After handling,wash face and hands very thoroughly.
4.Keep out of reach of children.
5.Store in a cool,dark and dry place.

FIRST AID MEASURES

1.Inhalation:Remove to fresh air and get medical attention immediately.
2.Eye contact:Immediately flush eyes with plenty of water for at lest 15minutes.Get medical attention immediately.
3.Skin contact:Immediately flush skin with plenty of soop and water for at least15minutes.Get medical attention immediatly.
4.Ingestion:Induce vomiting and get medical attention immediately.
5.See material safety data sheet.